Challenges to Project Management in Construction

Challenges to disgorge care in ConstructionBy Aivaras SymanasIntroductionThis exertion subprograms Dreadnought frame as a vehicle for discussion for challenges and of project c are in construction as well as examining risk management strategy, particularly focusing upon the issues that hook from .Challenges to Construction Project ManagementThe complexity of lymph glands demands, in concert with the increasing complexity of the construction manufacturing, particularly as a get out of technological developments, has over the years resulted in specialisation within the industry. Variety of professions have developed as separate skills (e.g. Architecture, Quantity Surveying, ME Engineering etc.) and yet on a small project all of those skills are involved. The key to the management of construction projects is therefore the way in which the contributors are organised so that their skills are used in the right manner and at the right beat for the maximum benefit to the client. There is little point in the construction industry developing its skills if they are not then implemented effectively.(Walker, 2002)Scenario issuesIn addition to the professions already mentioned, every construction project involves many of the following additional stakeholders five-fold regulatory bodies, local residents, statutory undertakers, end users etc. Internal and external stakeholders would be involved in different stages of the project. Early and comprehensive stakeholder identification and analysis, together with regular monitoring and updating, is necessary in order to deal successfully with all stakeholders and defuse many possible project obstacles. (Guerin, 2012)Successful Construction Project ManagementA project may be considered as successful if the building is delivered at the right time, at the appropriate price and quality standards, and delivers the client with a high level of satisfaction. (Naoum Langford, 1989). Effective project management seeks to make su re that these objectives are achieved, but nonetheless, completing large construction projects on time and on budget depends on a high degree of synchronization among many stakeholders which requires the entire team to take a crap in collaboration. The need for collaboration arise and are depended on level of uncertainty, interdependence and complexity of the project.Issues with construction industry and its link with collaboration was recognized in the Latham Report (Constructing the Team) in 1994, and again strengthen by the Egan Report in 1998 (Rethinking Construction)(Gardiner, 2014) .It is fair to say, that collaboration is even more needed in todays industry with its complex chain of supply and introduction of specialist subcontractors and supplier design. Effective collaboration is one of the tools to ensure that stakeholders bottom accomplish the complex sequence of interconnected tasks on time.Tools to achieve collaborationhttp//www.constructionbusinessowner.com/topics/ strategy/construction-company-management/key-successful-construction-project-management social function makingIron TriangleAs mentioned earlier, time personify and quality, in like manner known as iron triangle, is often associated with project success, finding a blameless balance between them, or identifying the priorities of key elements could play a big role of project management.Lawrence Miles developed methodology called value engineering which is used to make problems and identify and eliminate unwanted costs, while improving function and quality. In construction this involves considering the availability of materials , construction methods , transportation issues, site limitations or restrictions, planning and organisation, costs, wage and so on. https//www.designingbuildings.co.uk/wiki/Value_engineering_in_building_design_and_constructionKnowledgeDreadnought project involves major refurbishment works, as well as replacement of existing services. According to (Koehn To wer, 1982) refurbishment work demands even greater supervision than impudent build work, given the increase in labour, together with a corresponding increase in fragmented specialized work and the difficulties associated with unforeseen challenges such as as trump outos findings in demolition stage. The high level of uncertainty in refurbishment projects tends to lead to project over-run. The ability of project motorbus to cope with unexpected change and/or conflicts are necessary as well as knowledge associated with the analysis of project risks. (Smyth Pryke, 2008)Provision of a danger Management StrategyRisk Management is a particular form of decision making within project management, these decisions are made against a influence set of objectives, rules or priorities based upon knowledge, data and information relevant to the issue. (J.Smith, et al., 2009). Nevertheless, it is not possible to have all relevant information on time, or conditions of inwardness certainty and in some cases decisions are ill-founded, not based on a logical assessment of project specific criteria and lead to difficulties later. (J.Smith, et al., 2009). Dreadnought project was intended to be open by 2016, but due.kas nutiko ? the main contractor was liquidated.In construction projects each of the three primary targets of iron triangle entrust be likely to be subject to risk and uncertainty. It follows that a realistic estimate is one which makes appropriate allowances for all those risk and uncertainties which can be anticipate from experience and foresight. Project managers should undertake or propose actions which eliminate the risks they authorise, or reduce the effects of risk or uncertainty and make provision for them if they occur when this is possible and cost effective. (J.Smith, et al., 2009).Most commonly, the Client has an overall risk management strategy and policy included in the strategic documents and quality management systems. main issues concerning proje ct owner risk strategy are risk ownership (which party owns the risk risk exposure and transfer) and risk financing (how to include and use budget risk allowance or contingency). Project planning methods should be utilized to communicate to all parties in a project, to identify sequences of activities and to draw maintenance to potential problem areas. The successful realization of a project exit depend greatly on careful planning and continuous monitoring and updating. Sequences of activities will be defined and linked on a timescale to ensure that priorities are identified and that efficient use is made of expensive and/or scarce resources. The purpose of planning are therefore to persuade people to perform tasks before they delay the operations of other groups pf people, and in such a sequence that the best use is made of available resources and to provide a framework for decision making in the event of change. Project management information systems (PMISs) should forecast the solution of a project in price related to achievement of its objectives. Integrated cost models link time with money. They provide project managers with forecasts to completion in terms of cost, time resource usage and cash flow. Decision about future actions can be made with the best available forecasts in these terms. Cost models also help to overcome an implementation gap between monitoring systems and the managers action. Risk management software (RMS) is the term used to denote a specialist software, which can be used to apply on of the many risk assessment methodologies (e.g. Origami, Procore)It is well known fact that managing risk has two major objectives to avoid the downside risks and to effort opportunities. And very often, the latter has been neglected, as the former has much more to do with securing your project objectives, which for many organizations is priority. But on the hand, the major leaps in project cost and time reduction are results of innovative thinking with focus on exploring opportunities by challenging the risks. The trend today is to establish ambitious goals, to seek for new technological solutions and concepts and to look for effective ways of organizing and managing projects (J.Smith, et al., 2009)To achieve these aims it is suggested that a systematic approach is followed to identify the risk sources, to quantify their effects, to develop management responses to risk and finally to provide for residual risk in the projects estimates. These four stages comprise the core of the process of risk management. Risk Management can be one of the just about creative task of project management. (J.Smith, et al., 2009)ContingencyConclusionConclude recommend there are specific parts to the question, however, there may be a variety of options, it is useful to appraise these before you conclude the conclusion should re-iterate, this may be subjective, if a balanced view is stated, this cannot be wrong, however there essential be a conclusionWord count (excluding References) 2000Guerin, D. M., 2012. Project Management in the Construction Industry, Massachusetts Brandeis University.J.Smith, N., Merna, T. Jobling, P., 2009. Managing Risk in Construction Projects. 2nd ed. Oxford Blackwell Publishing.Koehn, E. Tower, S., 1982. authoritative aspects of construction rehabilitation.. ASCE, 108(C02), pp. 330-340.Naoum, S. Langford, D., 1989. An investigation into the performance of management contracts and traditional method of building procurement. s.l.Brunel University School of Engineering and Design PhD Theses.Smyth, H. Pryke, S., 2008. Collaborative Relationships in Construction. Oxford Blackwell Publishing Ltd.Walker, A., 2002. Project Management In Construction. 4th ed. Oxford Blackwell Science Ltd.